GT200K PLUS 480v 3 phase uninterruptible power system ups 200kva
Industrial UPS | 200kVA / 160kW | 3 Phase | 208Vac/220Vac/480Vac | 480Vdc
Prostar GT200K PLUS 480v 3 phase uninterruptible power system ups 200kva is ideal for data centers, telecommunications, industrial processes, and other mission-critical environments.
Equipped with cutting-edge technology, the uninterruptible power system ups features a double-conversion online design. It can provide a clean and stable output voltage, protecting sensitive equipment from voltage fluctuations, surges, and outages.
The UPS comes with an intuitive LCD display that provides real-time information on system status, battery health, and power metrics. This user-friendly interface simplifies monitoring and management.
Uninterruptible Power System UPS Features
High Input Power Factor
The uninterruptible power system ups boasts a high input power factor, which reduces the demand on the electrical infrastructure and improves overall energy efficiency. This feature helps in lowering electricity costs and optimizing power usage.
Advanced Online Double Conversion Technology
Ensures seamless power protection with stable output voltage and frequency, regardless of input fluctuations.
Smart Battery Management
The online ups incorporates intelligent battery management technology that optimizes charging and discharging cycles, prolonging battery life and ensuring reliable performance during power outages.
Redundant Power Supply
The UPS unlimited power supply can be configured with redundant power supply options, ensuring that if one power source fails, the other can take over seamlessly, providing an additional layer of reliability.
Scalability and Redundancy
The system supports N+1 or N+X redundancy configurations, allowing multiple units to operate in parallel. This feature enhances reliability and allows for capacity expansion as needed.
Multi-Communication Ports
The UPS supports various communication protocols, including SNMP, RS-232, and RS-485, enabling integration with existing management systems and facilitating remote monitoring and control.
Uninterruptible Power Supply Diagram
UPS System Touch LCD Information
Industrial UPS System Inner Components View
UPS Start-up Procedures
1. Confirm Power Supply
Ensure the voltage and frequency from the distribution panel to the UPS terminal are normal.
2. Activate Bypass Mode
- Turn on the SWBY (Bypass) and SWOUT (Output) switches.
- The UPS will operate in bypass mode, and the BYIN and BYPASS LED indicators on the panel will illuminate green steadily.
3. Switch to Mains Mode
- Turn on the SWIN (Main Circuit) switch.
- After approximately 30 seconds, the UPS will switch to mains inverter mode.
- The INPUT and INV LED indicators will illuminate green and remain steady.
- The BYPASS LED indicator will turn off, and the BATTERY LED indicator will begin flashing.
4. Activate Battery Connection
- After confirming the battery polarity is correctly connected, turn on the Battery Switch.
- The UPS will automatically detect battery efficiency.
- The INPUT and INV LEDs will remain green, while the BATTERY LED will turn off.
Important Note
If the touch screen displays “Current status: Phase sequence error” and the BYIN LED is flashing after turning on the SWBY and SWOUT switches, adjust the input phase of the power distribution until the error message clears. Then proceed to turn on the SWIN switch.
The Articles You may Like
- Generator Integration with Industrial UPS Backup System
- A Step-by-Step Guide to UPS Sizing Based on Motor Load Calculation
- Uninterruptible power supply – Wikipedia
- How High Power Solar Inverter Slash Energy Losses and Boost Profits
- Top 5 Reasons to Switch to Lithium Solar Batteries
- What is the CT Sensor in Solar Inverter On Off Grid
| Model | GT200K PLUS |
| Capacity | 200KVA/160KW |
| UPS Efficiency | >95% |
| Noise | 65dB~70dB(Distance 1 Meter) |
| Dimension(WxDxH mm) | 2200x908x1650 |
| Weight(Kgs) | 2500 |
| INPUT | |
| Voltage | 3 Phases 4 Wires, 208Vac/220Vac/440Vac/480Vac ± 25% |
| Frequency | 50Hz/60Hz±5% (Automatically) |
| Power Factor | ≥0.95 |
| OUTPUT | |
| Voltage | 3 Phases 4 Wires, 208Vac/220Vac/440Vac/480Vac ± 1% |
| Frequency | 50Hz/60Hz±0.05%(By Battery) |
| Harmonic Distortion | Linear load<3%, Non-linear load<5% |
| Imbalance Voltage | Balance load≤1%, Imbalance load≤3% |
| Phase Shift Angle | Balance load≤1°, Imbalance load≤2° |
| Transient Response | Output at 0~50%~100% ≤5%, response ≤ 10ms |
| Overload Capacity | 110%≥300Min, 125%≥10Min, 150%≥1Min |
| Crest Factor | 3:1 |
| Wave Form | Pure sine wave |
| Transfer Time | 0ms |
| BATTERY | |
| Type | Support VRLA Battery |
| D.C. Voltage | 480Vdc |
| Max. Charging Current | 0.2AxC10 |
| Charging Time(Standard) | 12hours |
| SYSTEM | |
| Protection | Input over-voltage, under-voltage; output overload, shortcircuit; Inverter over-temperature; Battery under-voltage,over-voltage |
| IP Protection | IP20 |
| Parallel Mode | N+1,N+X,can be in parallel with different power capacity |
| Software Interface | Windows9x,2000,NT,ME,XP,Linux,Novell,Macosx,NT4.0 |
| Meantime Between Failures | 300,000Hours |
| ENVIRONMENT | |
| Operating Temperature | 0℃ to 40℃ |
| Humidity | 0~95% (non-condensing) |
| Altitude | <1000m (with increase of 100m,it will reduce output of 1%) max. 4000m |
| Storage Temperature | -25℃ to 55℃ |
| MANAGEMENT | |
| Communication Interface | RS232/RS485 |
| Remote Signaling | Dry contact (battery low,battery discharging,bypass/fault),EPO |
| Remote Control | EPO and bypass |
| SNMP Card | Power management from SNMP manager and web browser |
Download Brochure
Chat Via WhatsApp
Scan below QR code to Talk with Mr. Orson directly!
