PIE8.5K-48L best 8500w off grid solar energy inverter for home

Off Grid Hybrid Solar Inverter | 8500W | 48V | 220Vac/230Vac | Lithium Battery Activation | 2 PV Inputs

SKU: PIE8.5K-48L Category:

Prostar PIE8.5K-48L best 8500w off grid solar energy inverter for home can meet the growing demand for sustainable and efficient energy solutions. It operates by converting the energy from solar panels into usable electricity.

The off grid solar energy inverter is ideal for a variety of off-grid solar energy applications in residential settings.  The PIE8.5K-48Lsolar energy inverter accepts a wide range of input voltages from the solar panels (60Vdc-500Vdc). This flexibility allows it to handle different solar array configurations.

The built-in 120A MPPT Solar Controller continuously tracks the maximum power point of the solar panels. It will adjust their operating conditions to extract the highest possible energy from them.

PIE series off grid solar inverter wiring diagram

With its utility output power factor, pure sine wave output, and a host of customizable options, this solar inverter represents a reliable and efficient solution for harnessing solar energy in off-grid applications.

Solar Energy Inverter 8500W Feautures

Pure Sine Wave Output

The device provides a pure sine wave output, delivering smooth and stable power that ensures compatibility with sensitive electronic devices, protecting them from potential damage caused by unstable power sources.

PV Input Voltage 60Vdc-500Vdc

With a wide photovoltaic input voltage range, the inverter can efficiently harness energy from solar panels, optimizing the energy conversion process. The broad range also allows for flexibility in system design and installation.

Built-in 120A MPPT Solar Controller

The integrated 120A Maximum Power Point Tracking (MPPT) solar controller optimizes the solar energy harvesting process, ensuring maximum efficiency in converting sunlight into electricity.

Lithium Battery Activation

This feature facilitates the activation and optimal utilization of lithium batteries, enhancing overall energy storage capabilities.

Reserved Communication Port for BMS (RS485)

The solar inverter charger is equipped with a reserved communication port for Battery Management System (BMS) connectivity via RS485, allowing for efficient monitoring and control of the battery system.

Battery Equalization Function

The inverter features a built-in battery equalization function that helps maintain battery health by balancing charge levels across all cells, preventing overcharging and ensuring longer battery lifespan.

Auto Restart Feature

Automatically restarts the system when the AC mains power recovers, ensuring uninterrupted operation.

 

Off Grid Solar inverter Overview

PIE off grid inverter 8500w 11kw connect terminal

PIE off grid inverter 8500w 11kw details

Solar Inverter LCD Display

PIE off grid inverter 8500w 11kw lcd display

 

Solar Inverter Charger Details

PIE-Series Off Grid Hybrid Solar Inverter Connect WiFi Monitoring PIE-Series Off Grid Hybrid Solar Inverter Work with Lithium Battery

Hybrid Solar Inverter Connect Lithium Battery

If choosing lithium battery for the inverter, you are allowed to use the lithium battery only which we have configured. There’re two connectors on the lithium battery, RS485 port of BMS and power cable.

Please follow below steps to implement lithium battery connection:

  1. Assemble battery terminal based on recommended battery cable and terminal size.
  2. Connect the end of RS485 port of battery to BMS(RS485) communication port of inverter.

PIE off grid inverter 8500w 11kw lithium battery connection

Lithium battery communication and setting

if choosing lithium battery, make sure to connect the BMS communication cable between the battery and the inverter. This communication cable delivers information and signal between lithium battery and the inverter.
This information is listed below:

  • Re-configure charging voltage, charging current and battery discharge cut-off voltage according to the lithium battery parameters.
  • Have the inverter start or stop charging according to the status of lithium battery.

Connect the end of RS485 of battery to RS485 communication port of inverter

Make sure the lithium battery RS485 port connects to the inverter is Pin to Pin, the communication cable is inside of package and the inverter RS485 port pin assignment shown as below:

PIN Number RS485 Port
PIN1 RS485-B
PIN2 RS485-A
PIN7 RS485-A
PIN8 RS485-B

 

The Articles You may Like

MODEL PIE8.5K-48L
Capacity 8.5KVA/8.5KW
Dimensions,D x W x H(mm) 540x415x122
Net Weight(Kg) 14
Parallel  Capability NO
INPUT
Nominal Voltage 220VAC/230VAC/240VAC
Acceptable Voltage Range 170-280VAC(For personal Computer);90-280vac(For Home Appliances)
Frequency 50/60 Hz(Auto sensing)
OUTPUT
Nominal Voltage 220VAC/230VAC/240VAC±5%
Surge Power 17KVA
Frequency 50/60Hz
Waveform Pure Sine wave
Transfer Time 10ms(For personal Computer);20ms(For Home Appliances)
Peak Efficiency(PV to INV) 96%
Peak Efficiency(Battery to INV) 94%
Overload Protection 5s@>=150% load; 10s@110%~150% load
Crest Factor 3:1
Admissible Power FACTOR 0.6~1(inductive or capacitive)
Grid-tie Operation Option
BATTERY
Battery Voltage 48VDC
Floating Charge Voltage 54VDC
OverCharge Protection 63VDC
Charging Method CC / CV
Max. Discharge Current 180A
Lithium Battery Activation Yes (by PV or Utility)
Lithim battery Communication Yes
SOLAR CHARGER & AC CHARGER
Solar Charger TYPE MPPT
Max.PV Array Power 5000Wx2
Max.PV Array Open Circuit Voltage 500VDC
PV Array MPPT Voltage Range 60VDC~500VDC
Max.Solar Input Current 18Ax2
Max.Solar Charge Current 140A
Max.AC Charge Current 120A
Max.Charge Current(PV+AC) 140A
PHYSICAL
Display LCD + LED
Protection Level IP20
Communication Interface RS232/RS485/Dry Contact
ENVIRONMENT
Operating Temperature Range -10℃ to 55℃
Storage temperature -15℃ ~ 60℃
Humidity 5% to 95% Relative Humidity ( Non-condensing )